The Spirax Sarco DCV3/B boiler feed check valve is designed specifically for use on boiler feedwater systems. It is a stainless steel disc check valve with a soft EPDM seat to ensure tight shut-off against boiler pressure, even under poor water conditions.
The KY31 and KY33 incorporate a pressure balancing bellows, which enables the valve to operate against higher differential pressures.
The S12 separator is an SG iron baffle type separator used for the removal of entrained liquids in steam, compressed air or gas systems. The fitting of insulation jackets will increase the performance of the separator.
The Hiter 85 Series check valve, which is considered a high-quality valve, provides excellent sensibility, fine control and easy adjustment, with very reduced weight and size.
The EL2600 is a combined pressure sensor and transmitter, designed for general industrial use. It has a 2-wire 4-20 mA current loop, and a ¼" NPT process connection.
The EP500 is a 2 wire loop powered positioner requiring a 4-20 mA control signal, and is designed for use with linear pneumatic valve actuators. The positioner compares the electrical signal from a controller with the actual valve position and varies a pneumatic output signal to the actuator accordingly.
The FTC32 is a carbon steel ball float steam trap with integral automatic thermostatic air vent. It is ideal for all process drainage applications as condensate is always removed efficiently and quickly over a wide range of fluctuating pressure and load conditions.
The switch kits are for use with linear pneumatic actuators conforming to the NAMUR standard. The series provides mechanical and inductive switched electric signals, relative to the actuator position.
The SV3 is a high lift, Pop Type Safety Valve approved to BS6759 parts 1 and 2 for use on compressed air and steam.
Your closest Spirax Sarco is